Guide to Renewing a Drainage Line
Your plumbing and sewer system has probably stayed an unchanging part of your home from the time it was built. This means that unless you reside in a brand new home, your sewer and drain pipes are older and maybe struggling with a few problems. If you own an older house, it is extremely most likely that you will come across a drain or sewer line issue at some point. Major drain line problems can be avoid by replacing old pipeline work well prior to any indicators of damage start to appear.
Renewing your old pipe work is a great preventative measure to avoid bursting or leaking pipes. In certain instances, it is necessary to excavate and renew a drain instead relining it. For instance, this is preferable if you want to improve the design or flow characteristics or if there such a severe damage that renewal is the only option. Professional plumbers like Active Plumbing can renew almost any type of water or drainage piping including the installation of new soak-aways and water mains, and addressing collapsed drains.
Methods for Renewing Drainage Lines
The primary methods for renewing a sewer connection from the home to where the home sewer line meets the main sewer line are:
- Open Trenching – Existing sewer lines are excavated and replaced. Roads, sidewalks, yards, driveways, and landscaping may be disturbed when this process is being done. Repairs can also be labor-extensive and expensive because they require hand digging within the other utility lines or roots.
- Pipe Bursting – Existing pipes are used to lay in new sewer lines. Pipe bursting requires a relatively shorter amount of time, but is dependent on particular conditions in order to be effective. First, the old pipe must be relatively straight. Second, the existing line must not have any dips, bends, and blockages. Third, there must be adequate space on the private property to dig a launch pit in order to install the new pipe.
- Pipe Relining – Existing sewer lines are repaired temporarily until a more permanent solution can be done. This is often employed when the other methods cannot be used, or when a two line sewer connection is not available. It requires minimal excavation. However, relined pipes are approximately half as durable as pipes that have been completely renewed.
Costs of Renewing a Drainage Line
The average cost to repair a sewer main is $2,339, although you could spend anywhere between $1,047 and $3,715, depending on the kind of damage. A drainage line renewal, on the other hand, can cost $2,000.00-$10,000 or more depending on the length and depth of the present pipes and the ease of access.
Suburbs we service:
Ashbury, Bankstown, Bankstown Aerodrome, Bass Hill, Belfield, Belmore, Beverly Hills, Birrong, Campsie, Canterbury, Chester Hill, Chullora, Clemton Park, Croydon Park, Condell Park, Earlwood, East Hills, Georges Hall, Greenacre, Hurlstone Park, Kingsgrove, Lakemba, Lansdowne, Milperra, Mount Lewis, Narwee, Padstow, Padstow Heights, Panania, Picnic Point, Potts Hill, Punchbowl, Regents Park, Revesby, Revesby Heights, Riverwood, Roselands, Sefton, Villawood, Wiley Park, Yagoona