How to Re-Seat a Tap
A dripping tap cannot always be fixed by just fitting a new washer. In some instances, the valve seat can get damaged. The valve seat refer to the surface that the washer closes onto when the tap is closed. The pressure of the water under the washer attempts to push itself between the seat and washer. Progressively, the water wears away the brass seat. Small channels are created in the seat which permits the water to pass through the washer and seat leading to the drip in the tap. This can get worse in homes that have hard water.
When this happens, re-seating the tap can be the perfect solution. Just keep in mind that dealing with water can be very dangerous so do not take any chances. A flooded house will definitely cost you a lot more than a plumber, so it is better to ask professionals like Active Plumbing to help you out if you do not know what you are doing! Keep in mind that a professional plumber will possess the necessary skills, equipment, and experience to ensure that the issue gets fixed in no time at all. Here is a quick guide to re-seating a tap.
Tap Re-Seating Kit
The concept of reseating the tap is basically done to resurface the tap and ensure that the washer tightly sealed in order to avoid any leakages. However, before you can get this done you need to have a tap reseating kit. You can purchase the kit from your local hardware store. Enclosed in the kit are detailed instructions that will help you properly repair a leaking tap.
Re-Seating a Tap
Turn off the water system to the tap. Then, get the head or handle of the tap. Sometimes, you will see a screw under a decorative piece of plastic or chrome. Utilizing a spanner, unfasten the tap cartridge. Find which screw thread holder for the tap appropriates for your tap re-seater. Verify which re-seater blade is appropriate for the seat you are trying to repair. Next, assemble your tap re-seating tool correctly and insert into the tap.
To tighten the blade on the re-seater thread, turn the grinder. This makes certain that the blade will not fall off. Keep turning till you are sure that any chinks on the seat are entirely removed. Turn on water just a little to get rid of the brass shavings. Then, turn off water and re-assemble tap. Make certain that you look for leakages and you’re done.
Suburbs we service:
Arncliffe, Banksia, Banksmeadow, Bardwell Park, Bardwell Valley, Bellevue Hill , Ben Buckler, Bexley, Bexley North, Bondi, Bondi Beach, Bondi Junction, Bondi North, Bondi South, Botany, Botany Bay, Brighton-Le-Sands, Bronte, Bronte Beach, Carlton , Centennial Park , Charing Cross, Chifley, Clovelly, Coogee, Coogee Beach, Daceyville, Darling Point, Diamond Bay, Dolls Point, Double Bay, Dover Heights, Eastgardens, Eastlakes, Edgecliff, Hillsdale, Kensington, Kingsford, Kingsgrove , Kogarah , La Perouse, Little Bay, Lugar Brae, Malabar, Maroubra, Maroubra Junction, Mascot, Matraville , Mill Hill, Monterey, Nelson Bay, Paddington, Pagewood , Phillip Bay, Point Piper, Port Botany, Queens Park, Ramsgate , Ramsgate Beach, Randwick, Rockdale, Rose Bay , Rose Bay North, Rosebery , Sandringham, Sans Souci , South Coogee, Sydney Airport, Tamarama, Tamarama Bay, Turrella, Vaucluse, Watsons Bay, Waverley, Wolli Creek, Woollahra.