call us : 1300 462 284 24/7 SUPPORT

Tap repairs

Only by using top quality components do you get a lasting result.Using the hydroseal method.Using top quality tap washers such as hydroseal products or other high quality products, when the job is finished you do not have to turn the taps off hard Just touch it and it turns off, if the taps are worn or unserviceable, we’ll replace them. Servicing of taps. By having damaged or worn washers or old taps this can also be a source of water hammer. replacing or servicing old tap including the meter tap , will rectify or at least reduce water hammer proplems.

The Hydroseal are the unique hydraulic sealing ‘O’ ring tap valve that positively seals dripping taps. Suitable for hot or cold taps.

Hydroseal method

Step 1. Remove the tap top assembly spindle.

Step 2. Inspect the tap for ware replace if necessary if ok replace the “0” rings and grease with a non toxic grease.

Step 3. Machine the tap seat to a smooth new finish.

Step 4. Flush out any metal fragments from the tap.

Step 5. Install a new hydroseal tap washer.

Step 6. Re install the top assemble add put the tap back together.

Step 7. Test operation.

Step 8. Clean up the area.

Tap repairs only by using top quality components do you get a lasting result using the hydroseal method. Using quality hydroseal products when finished you do not have to turn the taps off hard Just touch it and it turns off, if the taps are worn or unserviceable, we’ll replace then.

1300 462 284