Gas Stove Plumber Lower North Shore

Installing A Gas Stove

Installing a gas stove requires expertise and licensed gasfitters. A gas leak in your home can damage your property and other properties, and sometimes even be fatal. You may want to install a gas stove by yourself, but there’s always a risk involve of not installing it correctly and by Australian safety standards. You can have your gas stove properly installed with Active Plumbing licensed gasfitters.
If you have repaired your gas stove too many times already, it is probably time to replace it. Hiring a professional to install your gas stove oven could cost you a few hundred dollars, but it is worth it knowing that it is installed correctly, efficiently, and safely. Licensed gasfitters follow the standard in installing a gas stove. We are aware of the local codes and ordinances to ensure gas stove installation safety.

Installing Gas Line For A Stove

The first thing we do is prepare your gas line for a stove. Preparing lines for a new stove ensures your fittings are up to code, and any damage that may have happened to the lines won’t interfere with the appliance installation. Depending on the current installation, a gas appliance shutoff valve may be needed to install before prepping the remainder of the line.

How To Hook Up A Gas Stove

Licensed gasfitters will shut off the gas cock – the gas is off when the lever is at a right angle to the pipe. Most shutoffs are located behind the range, and sometimes in the basement just below. A shutoff is required in the line to the range and should be added if not yet installed. Professionals in this field should be able to tell you more about adding a shutoff.

Safe Gas Stove Installation

One of the most vital step is to have the best connections as well as approved fittings. Experienced gasfitters understand very well the distinction between the range fittings connector and also regulators. It can be figured out by the inside diameter of the tube used in a gas installation, if not noted on the package. The length of the connector must be considered to get enough room to work in between the stove and the wall. It is necessary also not to force or kink any type of connections or keep them far from sharp edges to prevent it from damaging, specifically when utilizing braided hoses. Gasfitters should always inspect their work for leakages using a gas leakage detector or any other approved technique.

Suburbs we service:
Artarmon, Berrys Bay, Blaxlands Corner, Cammeray, Castle Cove, Castlecrag, Chatswood, Chatswood West, Cremorne, Cremorne Junction, Cremorne North, Cremorne Point, Crows Nest, East Willoughby, Gore Hill, Greenwich, Kirribilli, Kurraba Point, Lane Cove, Lane Cove North , Lane Cove North , Lane Cove West, Lavender Bay, Linley Point, Longueville, McMahons Point, Middle Cove, Milsons Point, Naremburn, Neutral Bay, Neutral Bay Junction, North Sydney, North Willoughby, Northbridge, Northwood, Osborne Park, Riverview, Roseville , St Leonards , Waverton, Willoughby, Wollstonecraft.